The expansion bay within Veronte PCS ground control station permits to install custom datalinks thanks to the available ports for communications and power. Typical radio installations are Silvus Technologies, DTC, Microhard or Veronte SDL modules.
Veronte Control Stations PCS is an advanced ground station (GCS) optimized for the control of any Veronte Autopilot-powered vehicle. It contains all the necessary components for performing operations with UAVs and autonomous vehicles.

PCS Veronte Control Station contains all the necessary components to perform a wide range of operations with UAVs and other unmanned vehicles. The flexible architecture permits to adapt the GCS to the specific needs of the drone system.
Veronte PCS is a rugged ground control station hardware designed for outdoors use, thanks to the aluminum enclosure with IP54 protection and the adjustable height mast
The system permits to simultaneously operate various drones and ground control stations. Control can be handed over to a separate GCS at any time during the flight.
Operations requiring outstanding communication ranges can combine the benefits of Veronte PCS with Veronte Tracker for enabling auto tracking of directional antennas.
The expansion bay enables the installation of datalinks or additional electronics and devices within the protective enclosure, compliant with IP54 standards.

Veronte PCS is the perfect choice for long range communications. The adjustable height mast permits the antennas to be installed at an altitude of 3m to ensure a clear line of sight (LOS) among the ground control station and the drone. Furthermore, the optimized design permits to minimize the RF losses on the cable and to install the GCS in an open space far from the GCS laptop, this is achieved thanks to the ethernet and WIFI connectivity.


50 cm harness for Veronte PCS 2.0. Includes circular connector, USB, power input, Ethernet, joystick, and auxiliary wires.

2.4 GHz datalink module with FTS trigger button, 15 dBi directional antenna, 5 m cable, and accessories. Valid for PCS 2.2+. User installation required.

900 MHz datalink module with FTS trigger button, antenna, 5 m cable, and accessories. Valid for PCS 2.2+. User installation required.
