Virtual sticks are created to simulate a radio controller that controls the channels of the aircraft directly from the computer.

In the stick display, there are four icons and their function are:

  1. Return the stick to the centre
  2. Activate/Deactivate the virtual stick
  3. Move the stick in the X direction in a sinusoidal way
  4. Move the stick in the Y direction in a sinusoidal way

 

Stick Display Configuration

Last two are normally used in order to test the stick or servos.

If the Stick is not active it will make no effect on the system. Activate it by clicking on the second icon (some waves will appear near the icon and the stick will be actived). 
In order to deactivate it, only click on the antenna icon one more time.

Joystick Configuration MenuStick Configuration Menu

ItemDescription
ChannelSelect which channel is controlled by each axis.
Axis ScaleScale to show in the axis of the stick.
Endpoint Min & MaxEstablish the minimum and maximum values reached by the stick.
Frequency MinSets the minimum quantity of messages sent when there is no movement.
Frequency MaxSets the maximum quantity of messages that can be sent.
 Return centreWhen it is selected the stick automatically returns to middle position on stick release.
Configure JoystickConfigure external USB joystick for camera control.

 

 

Stick Configuration Elements