TS150 Tethered Station
TS150 Tethered Station
- Unlimited flight duration
- Up to 150m high
- Autonomous cable winder
- 1x 230VAC (110VAC Optional)
- Gimbal Camera EO/IR 4k HD.
NM&TS150 Tethered StationThe NM& TS150 Tether Station permits to power the UAV directly form an on-ground power source, providing unlimited flight time. Tether Station uses an innovative ultralight cable to connect the NM&TS150 to the base station on the ground so the drone has access to a continuous power source during the operation.
Increased safety & Better PerformanceUp To 150m High Thanks to the innovative ultra-thin cable included it is possible to fly tethered NMTS150 up to 150m (500ft) high.Unlimited Flight Time Tether cable provides continuous power to the drone so it can stay in the air permanently with no endurance limitations.Custom Power Source Powered from Vehicle power source for the electrical grid (230V AC), for installation on permanent stations.Self Cable Winder Autonomous system controlled by Veronte Autopilot controls cable release and collection avoiding tangles and cable breaks.Secure Communications Cable data transmission enables safe data communications avoiding jamming attacks and data piracy & capture at the time it avoids drone location.HD Video & Data Transmission High bandwidth Ethernet connection for video and data transmission through cable, enabling a two way communications channel.Wifi Connection Embedded WIFI module provides system status information and permits to monitor and control the drone from any PC or Tablet.NM&TS150 Integration Integrated with the NM&TS150 equipped with Veronte Autopilot, we have an advanzed monitoring station.
Embedded Veronte Autopilot TechnologyTether Station for NM&TS150 drone includes Veronte Autopilot technology providing advanced system control. Apart from tether release system control, embedded Veronte autopilot monitors embedded sensors (current, temperature, power input…) predicting and detecting system failures and commanding safety procedure activation.By combining it with a Veronte Autopilot powered NM&TS150 drone is possible to install it in moving platforms. Tether station shares its position with the drone. In this way, the drone will move with the base station. This functionality enables tether installation on moving platforms: cars, boats… to be used as a surveillance system, for lightening...
Safer than Drone SystemsBeing a leash system, it is more secure than drones. Once defined a safety area with a radius equal to the maximum height configured, and thanks to fibre reinforced cable, it is possible to guarantee that there will be no material or personal damages in the event of an accident.Veronte Autopilot technology together with sensors on the tether station provides advanced system safety. During the operation, the system is continuously self-checking system status. Once a failure or a deviation is detected it automatically displays an alert to the operator in charge of monitoring and performs a fail-safe procedure.It is possible to customize fail-safe routines based on data from the onboard Veronte Autopilot unit or from ground side sensors. Being possible to configure the action to be performed depending on the severity of the failure detected.
Custom PayloadsTether Station is independent on the installed payload. In this way it can be used with a wide range of payloads for various applications: cameras, lights, sensors, …Payload can be powered from the ground power system by using same tether cable used for drone power. It makes possible to customize payload bay and use different payloads that may not be suitable for a standard drone due to high power consumption.
Civil & Military ApplicationsSurveillance EO / thermal camera installation makes possible to use it for surveillance purposes with real time HD video broadcastAdvanced Monitoring Station Installed on a car or a research vehicle it is possible to raise a camera for increasingrange of view in military operations.Convoy Sky-Eye Installing a sky eye system on military convoys permits early risk detection and ambush avoidance.Impact Control Onboard cameras permit to monitor impact location for artillery shoots and introduce shooting corrections in the system.Anti-Drone System In use with drone detectors or jamming systems makes possible to detect and bring down drones trying to fly in restricted areas.Traffic Monitoring Thanks to the installation of cameras or radar systems, it is possible to have a high observation spot for traffic control.
Base Station Size 650x650x630mm Weight 53kg Cable Size 150m Cable Weight 3kg for 150m Power Input AC 1x 230V Power Input AC (Optional) 110V Advanced Control RTK, installed over vehicles, boats... Cable Data Transmission 100Mbps Onboard Features Size 1342x1422x358mm Weight 11,7 kg payload included (Camera Gimbal). Power Output Voltage 24V <> 6S Endurance Unlimited 24/7 Maintenance Each 1000h RGB / Visible Camera 70,7º HFOV, 65º FOV, 4K, 3840x2160p, 30FPS, 20x zoom (12x Optical) IR / Thermal Camera 18º horizontal field of view, 640x480p, 12µm, NEdT Gimbal Control 3 axis – precision encoders Artificial VIsion Target tracking, geo-tagging, geo-location, moving object detection … Safety Onboard backup battery; short circuit, power, current & overheat sensors
TS150 Tethered Station