Configure connected encoders on Veronte; draw as many points as needed in order to correlate the encoder input data on Veronte to the desired value on the system.

 

ENCODER CONFIGURATION

Encoder Configuration

FieldDescription
OffsetThe entire graph will be displaced the offset value
Graph points

Draw as many points as required for calibrating encoder performance

  • Encoder RAW: Real encoder captured data.
  • Encoder Calibration: S value corresponding to the encoder data
UVarInput variable for the encoder
RVarOutput variable for the encoder data

Encoder Parameters

The calibration wizard can also be used for calibrating encoders. Follow the described steps to perform the calibration.

fig.065-enconder-configuration-wizard

Encoder Configuration Wizard