This menu is used to set a custom name for one of the system variables.
- Click on the Custom Name cell of the desired variable and introduce the new name for it.
- When the name is introduced press Enter to store the name on the system.
- Press Save to save all changes.
Variable Name Customization
It is possible to configure custom operations to be performed in Veronte by selecting the input and output variables and operation parameters. For instance, in this menu it is possible to configure a Lidar sensor, converting the variable measured (voltage) into a physical variable.
The menu shown in the following figure allows the user to create operations with the system variables.
Super high, High, Low and Idle are the different processing velocities for the tasks performen in Veronte Autopilot (the workin frequencies for each one of them are indicated in Devices/Veronte/Frequencies). By default, the new operation appears in Idle, but it can be moved to another option just dragging it to the desired place.
When creating a new operation, the following types are available in Pipe.