In this menu it is possible to modify the Baudrate and the Mailboxes.
When the user has to configure Veronte to receive data from the CAN Bus, is mandatory configuring a Mailbox. In order to add a mailbox select (1).
CAN – Mailboxes
Mailboxes are used to save the data received, being possible to configure more than one. The options available when adding a new mailbox are:
- Mailboxes: allows the user to indentify a Mailbox with a determined configuration.
- Extended: frame format with 29 identifier bits.
- ID: identifier 11 or 29-bits (Extended), used to indentify RX messages. The value set has to be decimal.
- Mask: This filter is configured for reception messages; received data will be stored on mailboxes where message ID coincides with mailbox ID. Mask adds some flexibility on the reception, when comparing message with mailbox data, only binary digits configured as 0 on the mask will be taken into account. (e.g, for a configuration MASK: 00111 and ID:10110 all incoming messages addressed to 10XXX will be received in this mailbox).