VERONTE AUTOPILOT v.4.0

Veronte Autopilot is a miniaturized high reliability avionics system for advanced control of unmanned systems. This control system embeds a state-of-the-art suite of sensors and processors together with LOS and BLOS M2M datalink radio, all with reduced size and weight.

The unique Plug ´n Fly control system, Veronte Autopilot ads fully autonomous control capabilities to any unmanned system for complete operation, compatible with: UAV, Drone, RPAS, USV, UGV…

  • Highly configurable: Veronte control system is fully configurable; payload, platform layout, control phases, control channels… even the user interface layout can be user defined.
  • Custom routines: User selectable automatic actions, activated on system event or periodically.
    • Actions: phase change, activate payload, move servo, go to, onboard log, parachute release…
    • Events: waypoint arrival, inside/outside polygon, alarm, variable range, button…
  • Telemetry & log: Embedded datalink for system monitoring and telecommand and customizable user log in both onboard and control station, all with user defined variables and frequency record.
  • External sensor: Support for external sensor connection: magnetometer, radar, LIDAR,  RPM, temperature, fuel level, battery level, weather…
  • Payload & Peripheral: Transponder, secondary radios, satcom transceivers, camera gimbals, motor drivers, photo cameras, flares, parachute release systems, tracking antennas, pass through RS232 & CAN tunnel…

The sections that follow this introduction explain in detail all the features of Veronte Pipe, the software used to control, configure and operate the platform fitted with the autopilot. Besides, there is a part of the web page with information about how to install Veronte in the aircraft (or the selected type of vehicle), this is the hardware section (1.2).